ISO Tungsten Carbide Plates , Square Carbide Blanks Can Do 1500mm
Length
Our tungsten carbide strips are very suitable for woodworking
tools, plane cutter, hob cutter, sub-cutter etc.
We use advanced molding process in order to produce extremely length 1500mm, extremely slim 1mm carbide flat to meet our clients' requirements.
Specification L*W*T | L(mm) | W(mm) | T(mm) | Tolerance | | |
| 100*W*T | 100 | 4~100 | 1.0~36 | L | W | T |
| 150*W*T | 150 | 4~150 | 1.0~36 | +/-1.5% | +/-2.5% | +/-2.5% |
| 230*W*T | 230 | 8~60 | 1.0~36 | +/-1.5% | +/-2.5% | +/-2.5% |
| 250*W*T | 250 | 8~60 | 1.2~36 | +/-1.5% | +/-2.5% | +/-2.5% |
| 270*W*T | 270 | 8~60 | 1.2~30 | +/-1.5% | +/-2.5% | +/-2.5% |
| 320*W*T | 320 | 8~60 | 1.2~30 | +/-1.5% | +/-2.5% | +/-2.5% |
| 330*W*T | 330 | 10~40 | 1.2~30 | +/-1.5% | +/-2.5% | +/-2.5% |
| 410*W*T | 410 | 10~40 | 1.2~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 510*W*T | 510 | 10~40 | 1.2~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 610*W*T | 610 | 12,17,20,32 | 1.2~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 710*W*T | 710 | 12,17,20,32 | 1.2~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 855*W*T | 855 | 12,17,20,32 | 1.5~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 1100*W*T | 1100 | 12,17,20 | 1.5~10 | +/-1.5% | +/-2.5% | +/-2.5% |
| 1500*W*T | 1500 | 12,17,20 | 1.5~10 | +/-1.5% | +/-2.5% | +/-2.5% |
Can produce angle strips according to client's requirements.
Grade and Recommend Application:
| Grade | Co% | Grain | Hardness HRA | Density g/cm³ | TRS Mpa | elastic modulus Gpa | thermal expansion coefficient 10-6/0C |
| ST05B | 6.5 | 1.0 | 91.5 | 14.8 | 2800 | 525 | 4.9 |
| ST10C | 7.0 | 1.0 | 90.5 | 14.8 | 2800 | 520 | 5 |
| ST10B | 8.0 | 1.0 | 91.0 | 14.6 | 3000 | 510 | 5.1 |
| ST03F | 5.0 | 0.6 | 93.5 | 14.9 | 2600 | 540 | 4.8 |
| ST10F | 6.0 | 0.6 | 93.0 | 14.8 | 3000 | 530 | 4.9 |
| ST15F | 10.0 | 0.6 | 92.2 | 14.4 | 3300 | 490 | 5.4 |
| ST12F | 9.0 | 0.5 | 93.6 | 14.5 | 4000 | 510 | 5.3 |
| ST05F | 6.0 | 0.6 | 93.0 | 14.9 | 3200 | 530 | 4.9 |
ST05B:Suitable for processing solid wood, gray cast iron and other
materials.
ST10C:It is suitable for processing solid wood, nonferrous metals
and other materials.
ST10B:Suitable for processing solid wood, stainless steel and other
materials.
ST03F:Cutting tools suitable for making brake materials, etc.
ST10F:It is suitable for making simple cutting tools.
ST15F:It is suitable for rough machining of hardened steel and so
on.
ST12F:It is suitable for processing high speed steel and stainless
steel.
ST05F:Super high hardness, suitable for bamboo and wood cutting
tools.
Processing:
Powder preparation prescription according to the use requirements
wet grinding mixing grinding drying screening adding molding agent
drying screening after the preparation of mixture pelleting
pressing molding sintering forming (blank) inspection packaging
storage.
Feature:
Cemented carbide strips have excellent hardness, high hardness,
good wear resistance, high modulus of elasticity, high compressive
strength, good chemical stability (acid, alkali, high temperature
oxidation), low impact toughness, low expansion coefficient,
thermal conductivity and conductivity of iron and its alloys are
similar.
